StayLive actively promotes the sharing of information as soon as possible after near miss or actual safety incidents to inform members about hazards arising out of their operations.
8 May 2015
The work party had concluded a fault-finding task on a turbine and this confirmed the 69kg motor in the nacelle required replacing.
24 January 2015
A Meridian employee got into a company vehicle to discover that the back end and seats were covered in high vis yellow spray paint.
26 September 2014
A contractor to Meridian was tasked with performing scheduled work in WWD510. During the work they observed that a large number of oily rags had been used to soak up old oil around the hydraulic station and then left in situ.
11 September 2014
There was a significant near miss recorded on a Suzlon site in Sth Australia where a technician who was setting up the Sky Climber (fore blade inspections and repair works) dropped the pin out of the shackle after cutting the hole in the fiberglass from 80m.
21 August 2014
During a major component change, a 14.5tn gearbox became snagged and moved uncontrolled which lead to substantial bruising to the lift supervisor/dogman's arm.
25 July 2014
It was brought to the attention of the Wind Safety Specialist that a waist strap clip on the Aspiring fall arrest harness was disengaged while climbing over the main shaft.
5 March 2014
Vertical Horizonz NZ were instigated by Industrial Site Services to perform Global Wind Org height training at the ISS premises. ISS erected a 10m high temporary scaffolding tower in order to simulate the height of a wind turbine to make the training as realistic as possible.
