StayLive actively promotes the sharing of information as soon as possible after near miss or actual safety incidents to inform members about hazards arising out of their operations.
12 February 2024
While running 30" casing, a worker found a circlip on the rig floor. The operation was immediately stopped, and a thorough search commenced which identified the 30" elevator hinge pin was missing the circlip.
12 February 2024
A Contractor was using a tagged grinder to buff the turbine casing half joint. When he had finished, he pulled the grinder lead towards himself. The lead was draped over a scaffold, and he received a minor electric shock.
1 February 2024
Two technicians were removing a flow meter on the cooling tower, during the removal a technician located on the lower platform was in a kneeling position and while standing up, placed some of his weight with his hand on the railing to support himself.
11 December 2023
Casing for geothermal well (42" diameter x 12m long x 3 tons) dropped approximately 1 meter during off loading from truck.
30 November 2023
A contractor was drilling into a concrete wall in the power station when they made contact with an embedded lighting cable.
30 November 2023
Additional scaffolding had been put in place to improve access to and from the site, helping people to avoid slippery/uneven terrain.
30 November 2023
Loss of supply to 1200 consumers resulted when the switchboard earth was inadvertently closed into a live 11kV busbar, during planned outage works.
31 October 2023
Lifting into a Wind Turbine procedure 2 - Communications.
31 October 2023
Lifting procedures for lifting into a Wind Turbine.
31 August 2023
Due to a rotten scaffold plank and kick board not installed level, a spanner has fallen through a hole after being kicked backwards accidentally during maintenance work.
